P0306
Cylinder 6 Misfire Detected
high
i Description
The ECU has detected a misfire specifically in cylinder 6. This code only applies to engines with 6 or more cylinders.
? Common Causes
- Worn or fouled spark plug in cylinder 6
- Faulty ignition coil for cylinder 6
- Damaged spark plug wire/boot
- Faulty fuel injector for cylinder 6
- Low compression in cylinder 6
! Symptoms
- Check engine light (may flash)
- Engine vibration
- Loss of power
- Rough idle
# Diagnostic Steps
- Inspect spark plug from cylinder 6
- Swap ignition coil with another cylinder
- Test fuel injector
- Compression test on cylinder 6
⚙ Typical Fix
Replace the spark plug and/or ignition coil for cylinder 6.
Parts Needed
Spark plug, Ignition coil
Estimated Cost
$50-$400
↔ Related Codes
Q Frequently Asked Questions
Do not drive if the check engine light is flashing. A steady light allows careful, short-distance driving.
☞ Learn More
- What is OBD-II? — Complete guide to your car's diagnostic system
- How to Read DTC Codes — Step-by-step with a Bluetooth scanner
- OBD-II Scanner Buying Guide — Find the best scanner for your car